FXD SERIES BENDING BEAM LOAD CELLS

Bending beam load cells for approved weighing (capacities from 100kg to 500kg), automatic systems, dosage.

---

CAPACITIES (kg): 10, 20 , 50, 100, 200, 300, 500.

---

OIML R60. C3 precision class.

---

Stainless steel. IP68 protection.

---

MAIN FEATURES

C3 PRECISION CLASS STAINLESS STEEL IP68 PROTECTION MAX. CAPACITIES FROM 10 TO 500 kg SHIELDED CONNECTION CABLE OIML CERTIFICATE AVAILABLE UPON REQUEST TEST CERTIFICATE AVAILABLE UPON REQUEST

TECHNICAL FEATURES

Minimum load cell verification interval: Vmin = EMax / 10.000 Maximum number of verification intervals: nLC= 3000 Full Scale Output: 2.0 ± 0,002mV/V Combined error: 0,017% of Full Scale Output (F.S.) Non-Repeatability: 0,015% F.S. Temperature effect on zero: +/- 0,02% F.S. / 10°C Temperature effect on full scale output: +/- 0,02% F.S. / 10°C Compensated Temperature Range: –10°C/+40°C Operating Temperature Range: –30°C/+70°C Creep error after 30 minutes +/- 0,016% F.S. Maximum tolerated excitation voltage: 15 VDC Input Resistance: 400 ± 20 Ohm Output Resistance: 352 ± 3 Ohm Insulation Resistance: > 5000 MOhm Safe Overload: 120% F.S. Ultimate Overload: 150% F.S. Nominal displacement: < 0,4 mm 4-wire shielded cable, 3m long, 5mm diameter.

ATEX VERSION

The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to: ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65. The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT). IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.