SPM SERIES SINGLE POINT LOAD CELLS

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell; maximum platform dimensions of 600x600 mm.

---

CAPACITIES (kg): 100, 200, 500.

---

OIML R60. C3 precision class.

---

Aluminium alloy. IP67 protection.

---

MAIN FEATURES

C3 PRECISION CLASS OFF CENTER LOAD COMPENSATED ALUMINIUM ALLOY CONSTRUCTION IP67 PROTECTION MAX. CAPACITIES FROM 100 TO 500 kg FOR PLATFORMS WITH DIMENSIONS UP TO 600 X 600 mm SHIELDED CONNECTION CABLE OIML CERTIFICATE AVAILABLE UPON REQUEST TEST CERTIFICATE AVAILABLE UPON REQUEST

TECHNICAL FEATURES

Minimum load cell verification interval: Vmin = EMax / 15.000 Maximum number of verification intervals: nLC = 3000 Sensitivity: 2mV/V ± 10% Temperature effect on zero: 0,01% FS/10K Temperature effect on Full Span: 0,001% FS/10K Compensated Temperature Range: -10°C/+40°C Operating Temperature Range: -10°C/+50°C Creep at nominal load in 30 minutes: 0,01% F.S. Maximum excitation voltage without damage: 15 Vdc Input Resistance: 300..500 Ohm Output Resistance: 300..500 Ohm Insulation Resistance: >2000 MOhm Mechanical limit load in service: 150% F.S. Destructive load: 300% F.S. Deflection at nominal load: <0,5mm 6-wire shielded cable, 3m long, 5mm diameter

ATEX Version

The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to: ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65. The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT). IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.