SPSX SERIES SINGLE POINT STAINLESS STEEL LOAD CELLS

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 600x800 mm.

---

CAPACITIES (kg): 100, 300, 500.

---

OIML R60. C3 precision class.

---

17-4 PH stainless steel. IP67 protection.

---

MAIN FEATURES

C3 PRECISION CLASS OFF CENTER LOAD COMPENSATED MADE IN 17-4 PH STAINLESS STEEL IP67 PROTECTION MAX. CAPACITIES FROM 100 TO 500 kg FOR PLATFORMS WITH DIMENSIONS UP TO 600 X 800 mm SHIELDED CONNECTION CABLE TEST CERTIFICATE AVAILABLE UPON REQUEST

TECHNICAL FEATURES

Minimum load cell verification interval: Vmin = EMax / 15.000 Maximum number of verification intervals: nLC = 3000 Full Scale Output: 2mV/V +/- 10% Temperature effect on zero: 0,01% FS/10K Temperature effect on full scale output: 0,001% FS/10K Compensated Temperature Range: -10°C/+40°C Operating Temperature Range: -10°C/+50°C Creep at nominal load in 30 minutes: ± 0,01% F.S. Maximum tolerated excitation voltage: 15 VDC Input Resistance: 390 ± 15 Ohm Output Resistance: 359 ± 5 Ohm Insulation Resistance (100V) >1000 MOhm Safe Overload: 300% F.S. Ultimate Overload: 300% F.S. Nominal displacement: < 0.5 mm 6-wire shielded cable, 3m long, 5mm diameter

ATEX Version

The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to: ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65. The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT). IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.